All files for the Chimera Shotgun as of 3/1/2021

Be safe building and testing. Build videos will be posted at https://www.youtube.com/user/pilotgeek

Troubleshooting: Some have had issues with ejection or cases sticking. After drilling a chamber, please use rolled sandpaper or a hone to finish the chamber and ensure it's smooth and polished, especially at the mouth of the chamber. There should be no burrs or rough edges for best operation.

Disclaimer This product includes STL files and basic instructions only. This product is not print-in-place. This design requires skilled machining and assembly of additional components for complete assembly. You will need a drill at minimum, and a rotary tool with cutoff wheel can be used for most else.

Before building, please read up on all applicable gun laws and decide for yourself whether or not you can legally build this where you live. Some designs may require steel weights to be epoxied permanently inside the grips to meet minimum detectable amounts. You are responsible for knowing the laws regarding firearms where you live.

These plans are intended for educational purposes only and assembly is at your own risk.

This product includes STL files and basic instructions only. These files are provided as-is. They are intended for novelty and educational purposes. Printing, finishing parts, and final assembly are up to the end user. Basic assembly and machining skills are required.

LIABILITY DISCLAIMER Use of the files and documents within this Archive are at your own risk. Your continued use of files within the Archive constitutes your acceptance of such terms These files and any information contained therein are provided "as is." The designer disclaims any and all warranties of any kind, whether express or implied, as to anything whatsoever relating to this web site and any information provided herein, including without limitation the implied warranties of merchantability, fitness for a particular purpose, title, and noninfringement. The designer is not liable for any direct, indirect, special, punitive, incidental or consequential damages caused by the use of any files provided, whether resulting in whole or in part, from breach of contract, negligence, strict liability or any other cause of action. Because some jurisdictions do not allow the exclusion of implied warranties, the above exclusion may not apply to you.

INDEMNIFICATION/LEGAL RELIEF You agree to indemnify and hold the designer harmless from and against any and all loss, cost, damage, or expense including, but not limited to, reasonable attorneys' fees incurred arising out of any action at law or other proceeding necessary to enforce any of the terms, covenants or conditions of the Agreement or due to your breach of this Agreement